Values & Experience
PRIMERS AND TOPCOATS
Zumicon Coating & Waterproofing is a step ahead of other businesses in more than just our service.We have developed business partnership with renowned manufacturers of high quality products conforming with the local and international standards.
SEALBOND EPOXY COAL TAR BLACK CT-280
is a tough corrosion and abrasion resistant Coal tar Epoxy polyamide base, designed for protection of steel and concrete immersion services. Excellent in water and chemical resistance, and it gives exceptional performance as a protective barrier against corrosion.
SEALBOND EPOXY TANK LINING (ETL-100)
is a two-component epoxy compound formulated from highgrade epoxy resins and modified polyamide curing agents especially for storage tanks. It is lead-free, foodgrade and non-toxic when fully cured.
SEALBOND POLYURETHANE COATING
is a high build, attractive, satin finish topcoat with very good resistance to splash and spillage of acids, alkalies, solvents, salts and water. It is easily applied by airless or conventional spray.
SEALBOND EPOXY FLOORING & INDUSTRIAL COATING (EFC 321G)
is a two components epoxy based coating, formulated from carefully selected, highest grade, epoxy resins and curing agents, manufactured under strict quality control standards. It cures to a hard flexible surface that is abrasion resistant. It has an excellent adhesion on properly prepared substrates, such as concrete, steel and wooden surfaces. Designed for a general maintenance coating where gloss and color retention is desired.
SEALBOND EPOXY FLOORING SELF-LEVELING (EFC-80)
is a two-component epoxy cycloalphimatic amine base, formulated from carefully selected, highest grade, epoxy resin and curing agents, manufactured under strict quality control standards. It cures to a hard flexible surface that is abrasion resistant. It has an excellent adhesion on properly prepared substrates, such as concrete and steel. SEALBOND EFC-80 is water-impermeable and has excellent resistance to oil, solvents, alkalis and most dilute acids.
is a single component chlorinated rubber base coating formulated from carefully selected, highest grade resins, manufactured under strict quality control standards. It cures to a hard flexible surface that is abrasion resistant. It has an excellent adhesion on properly prepared substrates, such as concrete, steel
and wooden surfaces.
SELF-LEVELING EPOXY COATING
Hi-Build Epoxy Coating
High performance, high solids, self-levelling, chemical resistant, amine cured epoxy resin coating. Graded aggregate can be added to achieve different grades of slip resistance.
TERAKOTE® 887 MASTIC
Self-priming high build epoxy mastic coating
High Build Epoxy Mastic is a self-priming high-quality coating that can be used over steel, galvanized metal, aluminum and concrete. Terakot®e 887 High Build Epoxy Mastic bonds directly to steel or concrete. A single coat can beat performance of several coats of alkyd coating.
High Performance Grout and Mortar Epoxy
Designed for use as a heavy-duty primer coating systems for use on concrete, mortar, cement screeds and steel. Also, It provides structural bonding of new to old concrete and for structural repair of spalled concrete and masonry increasing the strength of concrete and mortar surfaces
EPOLOC ® 9700SL
Solvent-less epoxy floor coating
A two component,solvent-less epoxy resin and hardener with chemical resistant pigment.
· Tough and hard film with superior adhesion.
· Pinhole-less coating film with one coat.
· Excellent resistance to water and oils.
Excellent resiatance to Chemicals and corrosion
SEALBOND EPOXY PRIMER (EP-1008)
is superior rust inhibiting primer coat that is suitable for a variety of substrates. It is a two-pack formulation based on high-grade resins and polyamide curing agents. A versatile primer compatible with wide range of topcoats, it forms excellent coating systems that are resistant to fuel oils, solvents, salt, spray, acid fumes and most organic chemicals.
BONDFLEX ELASTOMERIC WATERPROOFING PAINT
is a high performance UV resistant water based coating formulated based on 100% Acrylic Emulsion for use as waterproofing paint on walls and roofs. It possesses outstanding exterior durability and excellent elasticity and elongation properties necessary to bridge forthcoming hairline cracks without cracking or wrinkling. Highly recommended for the waterproofing of roof deck, concrete gutters, toilet and bath, G.I. Roofing and Roof tiles and as protective coating for Polyurethane Foams.
SEALBOND EPOXY DEEP PENETRATING SEALER (DPS)
is a two-component clear epoxy coating especially formulated for waterproofing and concrete sealer applications. It has exceptionally low viscosity property that enables it to seep through concrete surface porosity providing an effective first line barrier against intrusion of water and other liquids. Its excellent adhesive, flexibility and chemical resistance properties will provide the user years of trouble-free protection.